Electrical Remodeling Hacks, Tips and Tricks

Here’s the thing – less is often more when it comes to minor electrical upgrades in your home. In other words, the less you interfere with the existing cables and fixtures, the better. Sure, you have to replace anything unsafe or improperly installed.

But, if you simply need to add a switch here and a bulb there, there are ways you can use to streamline the entire process. Here’s a roundup of tips that’ll come in handy when doing electrical remodeling projects within your living space.

Get the Right Tools

 

Indeed, this is a no brainer. Start by assembling every tool you need. The last thing that you want is to keep looking for a tester when your project is underway. Think of it as a way to enable you to complete the remodeling without hiccups.

Also, make sure that your power tools have all the accessories required to keep them functional.  If you’re going to use a drilling machine, for instance, ensure that you have the drill bit sets to keep you working smoothly. And, speaking of which, Drill Bit Best has a collection of high-quality drill bits to match your needs and by extension, keep you in charge of your project.

Look on the Other Side of the Wall

 

Listen, the interior of your walls is nothing more than double layers of drywall. Do you know what this means? Well, it implies that you can access electrical cables running inside your walls from the other side. More specifically, it means that you can check the other side of your walls if you need an outlet in a room that doesn’t have any.

All you need to do is to make a hole in your wall behind the outlet box at to tap into the circuit as long there’s a switch nearby.

Tip – Make sure that the circuit you plan to tap into doesn’t exceed its safe load (add a new outlet).

Move the Ceiling Without Messing up the Wiring

 

Moving the ceiling isn’t the easiest of tasks when doing an electrical remodeling. It’s trickier when your roof won’t sit where you want it to. Still, there’s a way to move it without interfering with the current circuit or adding more cables. Keep in mind that you can have more room for movement the circuit runs into your attic.

Besides, you can increase the room by securing the cables into your framing. Remember to fasten the wires with staple after moving the fixture.

Get Well-Acquainted with the Basics and Save Money

 

You don’t need professional training to carry out electrical work in your home. You don’t have to apply for a permit to carry out small jobs such as adding an outlet in your house. However, you must inform local authorities for major electrical work such as mounting a subpanel or new circuits. In essence, this means that you must work with a licensed electrician.

It is essential to mention here that you can legally do your electrical work and get fully approved depending on where you live. You can take a homeowner’s electrical exam to equip you with the skills on how to carry out the procedures.

And so you may know, the test consists of 10 to 20 questions.

Use Open Boxes to Add New Features

 

It is easy to miss electrical boxes because of the paint cover. See, these boxes are part of your room you can barely notice them over time. Even then, you can quickly access the boxes if you want to add a new fixture. Simply remove the cover use a non-contact tester to check the voltage.

What’s more? Use old boxes only when you need them. The boxes come with flip-up ears and tabs that hang on the backside of your drywall. All you need to do is to drill a hole next to the box and insert a cable as required. The idea is to get rid of the hassle of making large holes on your walls or ceiling.

The Bottom Line

 

See? It isn’t that hard to do electrical remodeling in your house even when you don’t have enough experience. These tidbits will get you started the right way.

 

 

 

 

 

 

 

Comments are closed